Balloon waterfall roman shade. A casual yet elegant design, this shade is softly gathered and has minimal fullness of 150% in width. The fabric cascades like a waterfall off the front of the headboard and creates a soft wavy bottom that retains 24” of extra fullness when fully lowered. Measure from the top of poufs. Rings are sewn vertically and horizontally, approximately every 10”. You may add welting on top of the shade for a more finished look. Includes fabric returns of 1 1/4” on inside mounts and 2 1/2” on outside mounts. Longer returns must be priced by adding returns to the finished width. It comes lined but may be unlined. To use as a top treatment, order 36” height then adjust and tie off as needed.

  This dog ear waterfall style has minimal fullness of 150% in its width.  The fabric cascades off the front of the headboard and creates soft, wide scallops at the bottom with small ears and retains 24” of extra fullness when fully lowered. Measure to top of poufs. Rings are sewn vertically every 10” and horizontally approximately every 24”. You may add welting on top of the shade for a more finished look. Includes fabric returns of 1 1/4” on inside mounts and 2 1/2” on outside mounts. Longer returns must be priced by adding returns to the finished width. It comes lined but may be unlined. To use as a top treatment, order 36” height then adjust and tie off as needed.

This elephant ear style has a wide swag and large ears formed by small pleats at top of shade.  When fully lowered, shade retains 24” of extra fullness. Measure to top of poufs. Style has minimal fullness of 150% on the width. Rings are sewn vertically every 10” and at approximately 1/4” of the shade’s width from the sides. Shades over 48” in width will have more than one section. You may add welting on top of the shade for a more finished look. Includes fabric returns of 1 1/4” on inside mounts and 2 1/2” on outside mounts. Longer returns must be priced by adding returns to the finished width. It comes lined but may be unlined. To use as a top treatment, order 36” height then adjust and tie off as needed.

  A center pleat gives this design an elegant yet casual appearance.  The relaxed swag along the shade’s bottom is created by placing a 2” center pleat at the top edge of each width.  It makes up well in most fabrics and as a single or multiple panel shade.  Generally, there is one swag per cut of fabric.  Rings are sewn vertically approximately every 6” and 2” from the sides. It comes lined but may be unlined.  Shade retains 24” of extra fullness when fully lowered. Measure from the top of poufs. Includes 1 1/4” returns on inside mounts and 2 1/2” returns on outside mounts. Longer returns must be added to width for pricing. To use as a top treatment, order 36” height then adjust and tie off as needed.