Buffalo

Also known as a multi pleat roman shade. Same as the traditional pleated roman shade with an alternating pattern of 1 large pleat followed by 3 small pleats. The large pleats are approximately 6” and the small pleats are 1”.  This shade must come lined. To use as a top treatment, order 36” height then adjust and tie off as needed. Buffalo has a 50% surcharge.

Retail Pricing   •   COM Pricing

Manhattan

Available in 4”, 6” or 10” pleats
( 6 inch Shown )
10" view Click Here
4" view Click Here
Traditional style pleated roman shade that’s perfect when you need a classic, elegant appearance. It has 6” pleats, wood battens and rises into neat folds that usually don’t require dressing. The textural effect on the face is created by placing grommets horizontally 8” – 10” apart. This shade is also available with 4” and 10” pleats. The Pleated Roman Shade must come lined. To use as a top treatment, order 36” height then adjust and tie off as needed. Manhattan 4" has a 20% surcharge.

Retail Pricing   •   COM Pricing

Hampton

Also known as a double pleated roman. The Hampton is the same as the traditional style pleated roman shade but with a series of 2 pleats (1 large and 1 small), throughout the shade. The larger pleats are approximately 6” and the additional pleats are 1”. This shade must come lined. To use as a top treatment, order 36” height then adjust and tie off as needed. Hampton has a 35% surcharge.

Retail Pricing   •   COM Pricing

Camden

This is a flat, tailored pleated shade with small (1/2”) pockets sewn horizontally across the rear of the shade with 10” between each pocket.  This creates neat tailored folds when the shade is raised. This style has a compact finish that’s excellent when you need to be closer to the window. This same finish is also used on the soft pleated Mesa style. Ordering with a turned headboard or cord forward will further decrease projection.  Rings are used instead of grommets and are sewn vertically every 10” apart and horizontally every 18”.  It makes up well in most fabrics. It comes lined but may be unlined.  To use as a top treatment, order 36” height then adjust and tie off as needed.

Trenton

Same as the Camden but designed for the more economy minded client. This shade is unlined and comes with a plastic tassel and cleat. Optional linings must be priced from the price chart. Fabric selection is limited to our ducktones, miekotwills, s/d cotton, Jessica, Ashley and Stephanie. To use as a top treatment, order 36” height then adjust and tie off as needed.

Retail Pricing   •   COM Pricing

Long Island

Flat roman shade with a round pole in the bottom hem.  When rising, the shade rolls up towards the rear.  The roll is supported by at least 2 strings on the front. It comes lined but may be unlined.  With ties, it makes for an excellent top treatment. To use as a top treatment, order 36” height then adjust and tie off as needed.

Retail Pricing   •   COM Pricing

Princeton

This front tailored pleated shade is the same as the Camden but with reverse pockets sewn to the face of the shade.  To use as a top treatment, order 36” height then adjust and tie off as needed.

Retail Pricing   •   COM Pricing

Also Available as a Duo Roman Shade DR

This design combines two roman shades on a single 1 1/4” headboard with two pulleys. Raise the front shade to reveal a sheer roman, that filters sunlight, while still permitting a view. Raise the rear shade to completely expose your view. Price as 2 shades. 1 1/4" board available only with styles in groups 1 – 3. Rear shade may be flats, dog ear, tailored pleated, reverse tailored or traditional pleated. Front shade may be any style, however, waterfall, dog ear waterfall and elephant ear will require a minimum 2 1/2” headboard for inside mounts and 3 1/2” for outside mounts.
Style Group 1       Style Group 2       Style Group 3       Style Group 4       Style Group 5
Woven Woods       Introduction       Dealer Samples       Request a Catalog       Home