Flat roman shade without battens. Perfect when you need an uncomplicated shade or wish to use a fabric pattern that should not be interrupted. It is unstructured, has no horizontal seams or stitching and there are no rods or battens across the width of the shade.  When lowered, it is completely flat; however, it rises in a loose, relaxed fashion and forms a slight scallop.  It works well with most fabrics. The Monterey comes lined but may be unlined; blackout lining makes for a stiffer shade.  Rings are sewn vertically and horizontally approximately every 6” – 8”. Outside mount is recommended as shades have a tendency to hourglass. To use as a top treatment, order 36” height then adjust and tie off as needed.

Like Monterey but perfect when you need neat folds and clean lines.  Wood battens are used across the width of the shade and rings are sewn vertically approximately every 6”– 8” and horizontally every 10”– 12”.  This shade has no horizontal seams or stitching lines across its face.  It makes up well in most fabrics. This shade must be lined. To use as a top treatment, order 36” height then adjust and tie off as needed.

Beautiful and unstructured, this dog ear roman is completely flat when down and has no rods or battens across the width.  As it rises, it creates a flange across the bottom and small ears on each side.  It works well with most fabrics.  It comes lined but may be unlined; blackout lining makes for a stiffer shade.  Rings are sewn vertically approximately every 6”– 8” and approximately 8” in from the sides. Outside mount is recommended as the flat shade has a tendency to hourglass. To use as a top treatment, order 36” height then adjust and tie off as needed.

This soft flat roman shade is a casual, unstructured shade that’s perfect when you need an uncomplicated shade or wish to use a fabric pattern that should not be interrupted. The bottom has a relaxed swag when raised. When lowered, the shade hangs flat. It has no horizontal seams or stitching. It works well as a single or multi panel shade. It makes up well in most fabrics. Generally, there is one swag per cut of fabric. Rings are sewn vertically approximately every 6”– 8” and approximately 2” in from the sides. It comes lined but may be unlined. To use as a top treatment, order 36” height then adjust and tie off as needed.

This design combines two roman shades on a single 1 1/4” headboard with two pulleys. Raise the front shade to reveal a sheer roman that filters sunlight while still permitting a view. Raise the rear shade to completely expose your view. Price as 2 shades. 1 1/4" board available only with styles in groups 1 – 3. Rear shade may be flats, dog ear, tailored pleated, reverse tailored or traditional pleated. Front shade may be any style, however, waterfall, dog ear waterfall and elephant ear will require a minimum 2 1/2” headboard for inside mounts and 3 1/2” for outside mounts.